[Tip] Solution for ZTE Broadband Modems on Mac OS X Lion 10.7

Solution found! Thanks for sharing Mark! My model is a MF626 and my ISP is vivo (Brazil), but that Vodafone ZTE Driver might work on other ZTE Broadband Modem models and ISPs too. Download the Driver here: http://is.gd/FTaImq

Install it, but don’t use the Vodafone interface, use the Mac OS X Lion Network Preferences, just set up a new connection and you’re ready to go : )

Take a look on the comments below for more detailed information!

[Howto] ZTE MF626 3G Modem on Linux

Creative Commons License
This work is licensed under a Creative Commons Atributtion-Share Alike 3.0 License.

The following is what I’ve found to be the minimum required to stablish a successful Internet connection using the ZTE MF626 3G Modem in many GNU/Linux distributions.

Minimum Requirements:

kernel linux 2.6.29* or above
xplc
wvstreams
uniconf
wvdial
ppp

Insert the Modem

eject /media/ZTEMODEM

Wait 9 seconds

ls /dev/ttyUSB*

Login as root

wvdialconf

nano /etc/wvdial.conf

Copy and paste this:

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
ISDN = 0
New PPPD = yes
Phone = *99#
Modem = /dev/ttyUSB2
Username = <insert your ISP username here>
Stupid Mode = 1
Password = <insert your ISP password here>
Baud = 921600

nano /etc/ppp/resolv.conf

Or

nano /etc/resolv.conf

Copy and paste this:

nameserver <insert your ISP DNS here>
nameserver <insert your ISP DNS here>

Login as root

wvdial